The Better Cone Mold - fits 1g
The Better Cone Mold - fits 1g
Slow burning 1 1/4 cones
Comes with 6 cones
NOT SURE WHAT SIZE TO GET?
TAKE THE QUICK SIZE QUIZ TO FIND OUT
🎁 Free Accessory Bundle Included - Up to $22.50 value. Includes pack of paper shells, 2 metal skewers & 4ml rolling glue. Auto-added in cart with purchase of mold. No code needed.
Couldn't load pickup availability
%20(1).png?v=1749675195)
Discreet shipping—no receipts or pricing included, perfect for gifts!
The perfect gift—whether it’s a birthday, groomsmen gift, or just because.
Your 1¼ Cone. Finally Burning How It Should.
If you already roll 1¼ cones, you know the feeling. You pack it, spark it, take a hit, and by the third pull it's already running on one side. So you rotate it. You try to catch the run. Maybe you relight it. Then it's done.
That was maybe four minutes.
You didn't do anything wrong. That's just what a hand-packed cone does. When there's no even compression, the weed inside ends up with loose sections and little air pockets scattered through it. The burn finds those gaps first and tears straight through them, every time.
So you end up burning through your flower way faster than you should, chasing the run instead of just enjoying the session, and relighting something that should've lasted a lot longer.
The Fix
The Better Cone Mold compresses your weed evenly so those dead spots never form in the first place. The airflow skewer runs a clean channel down the center, keeping the pull smooth from the first hit to the last. You're still using the same 1¼ cone paper and the same basic routine. The burn is just completely different: 2-3x longer, every time.
It's also our smallest size yet, built to slip right into a standard 1¼ cone. Perfectly proportioned for a solo session.
Fits: 1 gram
Cure time: 0-30 minutes (optional, but the longer you cure, the better)
Smokes: up to 3x longer than a standard cone
Why 1 1/4 cone smokers made the switch:
-
Works with any 1¼ cone paper you already use.
No new papers needed. Use what you have. -
No more chasing the run.
Even compression means no dead spots. It stays even and you stop rotating it halfway through. -
Smooth pull the whole way through.
The airflow skewer creates a clean channel through the center of the roll, so you get the smoothest pull. -
One cone that actually makes it around.
Customers report up to 3x longer burn time from the same amount. The pack is the only difference.
Join 20,000+ people who stopped settling for a 4 minute session.
What's included in your kit:
What's in the kit:
— Cone Mold — fits any 1¼ cone and at least 1g
— Built-in funnel so loading is clean and fast
— Packing tool to compress your weed for even, longer sessions
— 10 bamboo airflow skewers — this creates the smooth pull
— 6 cones to easily slide your cannagar core into
Size guide:
Upgrading sessions coast to coast
How To Use:
The Guarantee:
There's two of them.
If you're unhappy for any reason in the first 60 days, you get your money back. No questions.
But here's the one that matters more: if your first cone cannagar doesn't come out right, send us a photo or short video. We look at it with you, tell you exactly what to fix, and get you a clean result.
If we can't sort it out together, we make it right.
Frequently asked questions:
-
Do I need to buy your wraps?
Not at all! These are compatible with any 1 1/4 cone.
-
Is there a learning curve?
Yes, small one. If you follow the instructions, you'll be golden. If you get stuck reach out to us at support@purplerosesupply.com — we'll walk you through it directly.
-
How much slower does it actually burn?
Depends on a few variables, but with the same weed, even compression typically delivers around 3x the burn time. Some customers have reported even longer.
-
What's the difference between this and your other sizes?
The Better cone mold fits 1 1/4 cones. It's for people who already use cones and just want them to work better. If you want an even longer-lasting solo roll, the Stash Saver (1–2g) is the next step up. Start here if you're a cone person. This is the lowest-friction way in.This size was formerly called 1g cone mold
Packaging may vary as we roll out our new look.
Your Biggest Questions, Answered
Your Biggest Questions, Answered
“Is it really worth the price?“
- If you want a smoother, longer smoking experience that maximizes your flower-then yes. It’s a one-time investment for endless perfectly packed rolls. A slow, even burn means you use less flower over time, making every session last longer. Plus, it’s made from durable, food-grade plastic that’s built to last-not cheap or flimsy. Some customers even think it’s metal when they first pick it up.
“Why would I use this instead of just rolling like I always do?“
- Most of our customers already know how to roll—this isn’t about replacing that. It’s an entirely different experience you can’t achieve by hand. Designed to level up every session, it delivers a slow, even burn that lasts up to 3x longer. That means fewer re-rolls, less waste, and a consistently smooth experience—every time.
“How is this different from using a cone or a roller?“
- Cones burn fast and unevenly, wasting your flower. Rollers are quick, but the results are inconsistent—loose in some spots, too tight in others. A Cannamold transforms your roll into a slow-burning, precision-packed experience that lasts up to 3x longer, burns evenly, and delivers a smoother pull every time - it’s a completely different experience.
“Will this make my roll too tight or mess up the airflow?“
- Nope. The precision-packed design eliminates air pockets, giving you a smooth, effortless pull every time. No clogging, no uneven burns—just a controlled, slow burn from start to finish.
“I have limited dexterity / a disability—can I still use this?“
- Absolutely. Our Cannamold makes rolling effortless—no intricate handwork needed. Just pack, set, and roll for a smooth, even burn that lasts up to 3x longer. Many customers who struggle with traditional rolling say this makes the process easier, more reliable, and frustration-free—without sacrificing quality. Try it for yourself—if it’s not for you, send it back for a refund - without any hassles.
Other Common Questions
Other Common Questions
What’s a Cannagar?
A Cannagar is an all cannabis cigar made by compressing cannabis around a skewer and then rolling it with hemp or cannabis fan leaves. The process of compressing the cannabis around a skewer creates a slow-burning, full-flavored roll that lasts for hours. This type of compressed roll was originally known as a “Thai Stick”. The term Cannagar was newly created to signify a Thai Stick rolled in fan leaves.
Can I buy pre-made Cannagars?
You could. But, store-bought Cannagars are hard to find and cost hundreds of dollars. Save your money and have all of the creative freedom by making your own!
How to make a Cannagar?
Using a Purple Rose Supply CannaMold, you can easily make a Cannagar in 3 steps. Pack the flower into the mold, store it for a few hours, roll it in a whole-leaf hemp wrap, and enjoy. You can visit the How-To-Make-a-Cannagar page for a quick infographic or instructional video to see how it’s done.
How do you light a Cannagar?
Spark the tip of your Cannagar using a torch lighter. Make sure that you get the whole cherry lit by rotating the cannagar. (Starting your burn correctly will help keep it burning correctly) Once it's fully lit, you're ready to smoke.
How long do I cure it for?
Mini: 0-30 mins
Personal: 0-1 hr
Small: 1-3 hrs
Large: 6-12 hrs
But the longer the better!
How long does a Cannagar last?
Mini - Up to 45 Minutes
Personal - Up to 1 Hour
Small - Up to 3 Hours
Large - Up to 6 Hours
What if I don’t have time to store my packed Cannagar mold?
We recommend storing your packed mold in a cool, dry place. Cannagars that stay in their mold for a few days are smoother and permanently hold their shape. If you’re in a rush, you should get your Cannagar core as compressed as possible by packing your flower in a little at a time and pressing down hard on the packing tool each time. Leave it in the mold for as long as you can and when you remove it roll it right away so it holds its shape.
How do I clean my CannaMold?
After every use, clean the inside of your CannaMold by scrubbing with diluted rubbing alcohol and paper towels or brushes.
Dilution: 50/50 Water & Isopropyl Alcohol.
To clean the outside of CannaMold, use only water. Alcohol will strip the paint on the outside.
CHECK OUT OUR EASY TO USE CLEANING KIT!
Shipping & Returns
Shipping & Returns
When will I receive my order?
Most orders are shipped within 3 business days (excluding pre-order products like the 42g CannaMold). Shipping times depend on the shipping method you selected. We do offer expedited shipping (with an added cost).
What is the refund policy?
We want you to be 100% satisfied. So if you’re unhappy with your purchase for any reason, just let us know and mail it back to us! We got your back. You can find our mailing address and entire refund policy here: Refund Policy
International Orders (outside of U.S)
All import tariffs and customs fees are customer’s responsibility.
Unboxing: What’s Inside?
Curious what comes with a CannaMold? This unboxing shows you everything inside, start to finish. We keep things transparent. So you know exactly what you'll get—before it even hits your doorstep.
